Resfoam 1K-M one-component injection solution 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- category: Waterproofing / Membranes
- Brands: MAPEI
FOX WATERPROF FS105 White 18kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Foamjet T two-component injection solution A+B 20+24 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Stabilcem expanding cement mortar for injection works 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- category: Waterproofing / Membranes
- Brands: MAPEI
FOX WATERPROF FS105 White 18kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Foamjet T two-component injection solution A+B 20+24 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Stabilcem expanding cement mortar for injection works 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- category: Waterproofing / Membranes
- Brands: MAPEI
FOX WATERPROF FS105 White 18kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Foamjet T two-component injection solution A+B 20+24 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Stabilcem expanding cement mortar for injection works 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Resfoam 1K-M one-component injection solution 20 kg
choose a product
- ALPHA BARRIER 4.0
- POLYSINT grey kg. 20
- ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- SELFline A15
- FOX ULTRATEX
- FOX WATERPROF FS105 White 18kg
- FOX COMBOTAPE 250/1 20m
- bitumen primer - ICopal
- Waterproofing mastic Profimast (21.5 l/18 kg)
- FOX MULTISEAL FS367 25kg
- Purtop Easy/ 25 kg
- icoproof
- Foamjet T two-component injection solution A+B 20+24 kg
- FOX INJECTION EP FC420 Two-component injection solution
- Stabilcem expanding cement mortar for injection works 20 kg
