bitumen primer - ICopal
- category: Coating waterproofing
- Brands: ICOPAL
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |
- Low flow rate;
- Short drying period.
APPLICATION AREA
Concrete, sand-cement and metal surface priming before application of welded and self-adhesive roofing and waterproofing rolled bitumen materials, and before application of mastics
APPLICATION METHOD
Application of bitumen primer is carried out with a brush, a paint roller or by spraying at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, primer should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
Before use, the whole volume of primer of the bitumen should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit. The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
Application of rolled materials and mastics is allowed only after primer is fully dried. It is important to wear gloves when working with the materials. Contact of the materials with eyes and skin is to be avoided.
Products offered
Coating waterproofing FOX WATERPROF FS100 4 kg
- category: Coating waterproofing
- Brands: FOX BAU
Two-component primer - BALCONY WATER PRIMER (Comp A+B) 1KG
- category: Coating waterproofing
- Brands: ICOBIT
Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- category: Coating waterproofing
- Brands: FOX BAU
waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- category: Coating waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- category: Coating waterproofing
- Brands: FOX BAU
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing
- Brands: MAPEI
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing
Insulation tape FOX COMBOTAPE 250/1 mm; 20 m
- category: Coating waterproofing
- Brands: FOX BAU
Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- category: Coating waterproofing
- Brands: FOX BAU
Primer bituminous Profimast (21.5 l / 16 kg)
- category: Coating waterproofing
- Brands: BITUMAST
Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing
- Brands: MAPEI
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
bitumen primer - ICopal
choose a product
- Bitumen primer IDROPRIMER 20 liters
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Two-component primer - BALCONY WATER PRIMER (Comp A+B) 1KG
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- injection packer - Idrostop Multi ST
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Bitumen primer on solvent base POLYCOLL 25kg
- Two-component injection solution Foamjet F 20+23kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Insulation tape FOX COMBOTAPE 250/1 mm; 20 m
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Primer bituminous Profimast (21.5 l / 16 kg)
- Bitumen waterproofing Plastimul / 20 kg
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |