Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- category: Coating waterproofing
- Brands: BITUMAST
The primer is a solution of high-quality petroleum products, namely, a mixture of bitumen and specially selected organic additives, impregnated with s... See more
The primer is a solution of high-quality petroleum products, namely, a mixture of bitumen and specially selected organic additives, impregnated with specialized plasticizers.
See less
Used for priming concrete, wood and metal surfaces to ensure maximum adhesion of adhesive waterproofing materials or all types of soft tiles. Provides adhesion of treated surfaces. Thoroughly mix the primer throughout. The surface to be treated must be dry, previously cleaned of dirt, fragile remnants of the old coating. It is applied with a brush, roller in 2-3 layers, depending on the surface, as well as by airless blowing. The primer penetrates the surface, impregnates and binds the material, providing a strong adhesion of waterproofing materials to the surface. In the case of work at low temperatures, it is recommended to warm the material up to +15 degrees. Application is allowed up to -20 degrees. Store in a dry, protected from sunlight place at a temperature of -30 to +50 degrees. Warranty period of storage is 35 months.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
choose a product
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Bitumen waterproofing Plastimul / 20 kg
- Liquid waterproofing of temperature seams FOX PURMAX MASTIC SET-5 kg set
- Two-component injection solution - FOX INJECTION EP FC420
- bitumen primer - ICopal
- Liquid Extra Strength Membrane - KEEP DRY 18KG ROSSO MARTE
- Polyurethane-based waterproofing FOX PURMAX FS601 WHITE 25kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Waterproofing material R-COMPOSIT 10 KG
- waterproofing seal - FOX PLUG FC340 PLUS
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- mortar - FOX BASEMOR FC205 GRAY 25 kg