SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
- category: Waterproofing / Roll waterproofing
- Brands: ICOPAL
Rolled bitumen-polymer SBS-modified material on a non-woven base made of high-strength polyester with a coarse-grained coating on the top side. The un... See more
Rolled bitumen-polymer SBS-modified material on a non-woven base made of high-strength polyester with a coarse-grained coating on the top side. The underside of the roofing felt is protected by a special heat-resistant Syntan coating, onto which adhesive strips are applied using longitudinal corrugation technology, covered with a polyethylene film made of non-flammable material.
Manufacturer country - Russia
See less
Width, m 1 Length, m 7 Weight, kg/sq.m 5.7 Base type: high-strength polyester Tensile strength, N/50 mm, no less than 600 Relative elasticity, %, no less than 20 Heat resistance for 2 hours at temperature , °C, not less than 100 Flexibility on a beam with a radius of curvature of 25 mm at a temperature, °C, not more than minus 25 Brittle temperature of bitumen-polymer binder, °C, not more than minus 35 Water resistance at a pressure of not less than 0.2 MPa for 2 hours later there are no signs of water penetration. Water absorption over 24 hours by weight, %, no more than 1.
Products offered
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
FOX ROCKTOP FF100 FIBERED SET 31.5kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
GEO GM-4 anti-erosion geomat for construction purposes
- category: Waterproofing / Membranes
- Brands: FOX BAU
Foamjet F two-component injection solution A+B 20+23 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
FOX ROCKTOP FF100 FIBERED SET 31.5kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
GEO GM-4 anti-erosion geomat for construction purposes
- category: Waterproofing / Membranes
- Brands: FOX BAU
Foamjet F two-component injection solution A+B 20+23 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
FOX INJECTION EP FC420 Two-component injection solution
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
FOX ROCKTOP FF100 FIBERED SET 31.5kg
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
GEO GM-4 anti-erosion geomat for construction purposes
- category: Waterproofing / Membranes
- Brands: FOX BAU
Foamjet F two-component injection solution A+B 20+23 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
choose a product
- FOX INJECTION EP FC420 Two-component injection solution
- FOX ROCKTOP FF100 FIBERED SET 31.5kg
- GEO GM-4 anti-erosion geomat for construction purposes
- FOX AQUAROOF SR 18kg
- Purtop Easy/ 25 kg
- SELFline A15
- PVC membrane Mapeplan D15 (1x20)
- FOX TRIPLETAPE DRENAJ
- ANTIRADICE PE P 4mm F F 10m
- Foamjet F two-component injection solution A+B 20+23 kg
- ALPHA BARRIER 4.0
- Vilatex in ECP 2.5 kg/sq.m (1*15m)
- Vilatex in ECP 4.0 kg/sq.m (1*10m)
- icopal ultra Н
- Elastoizol Business EPP 4.0
Width, m 1 Length, m 7 Weight, kg/sq.m 5.7 Base type: high-strength polyester Tensile strength, N/50 mm, no less than 600 Relative elasticity, %, no less than 20 Heat resistance for 2 hours at temperature , °C, not less than 100 Flexibility on a beam with a radius of curvature of 25 mm at a temperature, °C, not more than minus 25 Brittle temperature of bitumen-polymer binder, °C, not more than minus 35 Water resistance at a pressure of not less than 0.2 MPa for 2 hours later there are no signs of water penetration. Water absorption over 24 hours by weight, %, no more than 1.
