Primer bituminous Profimast (21.5 l / 16 kg)
- category: Coating waterproofing
- Brands: BITUMAST
The primer is a solution of high-quality petroleum products, namely a mixture of bitumen and specially selected organic additives, impregnated with sp... See more
The primer is a solution of high-quality petroleum products, namely a mixture of bitumen and specially selected organic additives, impregnated with specialized plasticizers.
See less
Used for priming concrete, wood and metal surfaces to ensure maximum adhesion of adhesive waterproofing materials or all types of soft tiles. Provides better adhesion of treated surfaces. Thoroughly mix the primer throughout. The surface to be treated must be dry, previously cleaned of dirt, fragile remnants of the old coating. It is applied with a brush, roller in 2-3 layers, depending on the surface, as well as by airless blowing. The primer penetrates the surface, impregnates and binds the material, providing a strong adhesion of waterproofing materials to the surface. In case of work at low temperatures, it is recommended to warm up the material to +15 degrees. Application is allowed up to -20 degrees. Store in a dry, protected from sunlight place at a temperature of -30 to +50 degrees. Warranty period of storage is 35 months.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Primer bituminous Profimast (21.5 l / 16 kg)
choose a product
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- expanding cement mortar for injection works 20 kg - Stabilcem
- Bitumen waterproofing Plastimul / 20 kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Two-component injection solution - FOX INJECTION EP FC420
- bitumen primer - ICopal
- Epoxy Mortar FOX EPOMORTAR FC510
- Two-component injection solution Foamjet F 20+23kg
- Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- one-component injection solution 20 kg - Resfoam 1K-M
- Insulation tape FOX COMBOTAPE 250/1 mm; 20 m
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m