TECHNOFLOOR STANDARD - 1200 * 600 * 30 mm (5.76 sq / m)
- category: ქვაბამბა | თბოიზოლაცია / Sound insulation
- Brands: TECHNONICOL
TECHNOFLOOR STANDARD - Non-flammable slabs made of stone wool. Slabs are designed for thermal and sound insulation layers in the systems of sound insu... See more
TECHNOFLOOR STANDARD - Non-flammable slabs made of stone wool. Slabs are designed for thermal and sound insulation layers in the systems of sound insulation for buildings.
See less
|
Parameter name |
Measurement unit |
Criteria |
Value |
Test Methodology |
|
Thermal conductivity, λ10 |
W/m·°K |
Not above |
0,036 |
State All-Union standard 7076-99, State All-Union standard 31925, State All-Union standard 31924 |
|
Thermal conductivity, λD |
W/m·°K |
Not above |
0,037 |
State All-Union standard EN 32314 |
|
Thermal conductivity, λА |
W/m·°K |
Not above |
0,039 |
State All-Union standard 7076-99, Code of Practice 23-101-2004 |
|
Thermal conductivity, λБ |
W/m·°K |
Not above |
0,041 |
State All-Union standard 7076-99, Code of Practice 23-101-2004 |
|
Compressive strength at 10 % of deformation |
kPa |
Not less than |
25 |
State All-Union standard EN 826-2011 |
|
Organic matter contents |
% |
Not above |
4,5 |
State All-Union standard 17177-94 |
|
Short-run water absorption at partial immersion |
kg/m2 |
Not above |
1 |
State All-Union standard EN 1609-2011 |
|
Water absorption at partial immersion of samples during fixed long-time |
kg/m2 |
Not above |
3 |
State All-Union standard EN 12087 |
|
flammability |
degree |
- |
non-flammable |
State All-Union standard 30244-94 |
|
Density |
kg/m3 |
- |
110 (±10) |
State All-Union standard 17177-94 |
|
Parameter name |
Measurement unit |
Criteria |
Value |
|
length |
mm |
1200 (1000)* |
State All-Union standard EN 822 |
|
Width |
mm |
600 |
State All-Union standard EN 822 |
|
Thickness |
mm |
20-50* |
State All-Union standard EN 823 |
|
Grade by thickness |
Т |
Т4 |
State All-Union standard 32314-2015. |
- High durability
- Use of 30 mm thick TECHNOFLOOR STANDARD in the structure of floating floor with sand cement screed reduces the impact noise level by half* than the same structure without TECHNOFLOOR STANDARD slabs
- Fast application
- Guarantees safety and environmental performance
- Slabs are used in industrial and civil construction as:
- a thermal and sound insulation layer in floating floors with sheet-backing coat screed
- a thermal and sound insulation layer in floating floors when concrete or cement screed is applied directly to thermal insulation layer
- Storage:
- Slabs must be stored into containers or stacked on the pallets separately by trade mark and size. Polyethylene heat-shrink film is used for packaging. The material must be protected from atmospheric precipitation during whole period of storage.
- Transportation:
- Transportation and storage of the slabs must be in compliance with State All-Union standard 25880-83.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
TECHNOFLOOR STANDARD - 1200 * 600 * 30 mm (5.76 sq / m)
choose a product
- Stone wool ISOBOX 800*600*50 15 panels/pack (7.2 m2)
- Stone wool - SW Floating Floor Board 110 110 kg/m3/600x1200x30 mm (5.76m2)
- Rolled stone wool with wire mesh Isotec Wired Mat 80 SM 2000x1000x50 mm. (2 sq.m.)
- Stone wool - Ravatherm 135 kg/m3 50x600x1200 mm (2.88 m2)
- Stone wool - Ravatherm 40 kg/m3 100x600x1200 mm (2.88 m2)
- Stone wool - Ravatherm 110 kg/m3 50x600x1200 mm (2.88 m2)
- TERRAWO with YELLOW GLASSFIBER 50X600X1200 (70 kg/m3) 5.7 6m2
- Stone wool - Ravatherm 120 kg/m3 50x600x1200 mm (2.88 m2)
- Rock wool TERRAWOOL TW12040 50X600X1200 (120 kg/m3)
- TEXNOVENT EXTRA 1200 * 600 * 50 mm (4.32 sq / m)
- Stone wool - Ravatherm 40 kg/m3 50x600x1200 mm (5.76 m2)
- ISOVER Sound Insulation
- Stone wool - 1200*600*50 mm (8.64 m2)
- Rolled stone wool with wire mesh and foil - Isotec Wired Mat 80-SM-AL-50/T-1000x2000
- Stone wool TERRAWOOL 145KG/M3 50x600x1200 (2.88 m2)
- Soundproofing stone wool TechnoSonus BP Standard
- FLEX membrane
- TechnoSonus VEM 4 SA
- Membrane FLEX SA
- TechnoSonus VEM 4
- Soundproofing stone wool TechnoSonus BP Praim
- TechnoSonus Hydro
- Vibration isolating mount Sonocrepe EP 20
- Sonoplat Combi
- Membrane FLEX AL
- TechnoSonus VEM 2 SA
- High-component spreader NANO FIX - 1KG
- TechnoSonus VEM 2
- Sonoplat Standard Plus
- Sonoplat Standard
|
Parameter name |
Measurement unit |
Criteria |
Value |
Test Methodology |
|
Thermal conductivity, λ10 |
W/m·°K |
Not above |
0,036 |
State All-Union standard 7076-99, State All-Union standard 31925, State All-Union standard 31924 |
|
Thermal conductivity, λD |
W/m·°K |
Not above |
0,037 |
State All-Union standard EN 32314 |
|
Thermal conductivity, λА |
W/m·°K |
Not above |
0,039 |
State All-Union standard 7076-99, Code of Practice 23-101-2004 |
|
Thermal conductivity, λБ |
W/m·°K |
Not above |
0,041 |
State All-Union standard 7076-99, Code of Practice 23-101-2004 |
|
Compressive strength at 10 % of deformation |
kPa |
Not less than |
25 |
State All-Union standard EN 826-2011 |
|
Organic matter contents |
% |
Not above |
4,5 |
State All-Union standard 17177-94 |
|
Short-run water absorption at partial immersion |
kg/m2 |
Not above |
1 |
State All-Union standard EN 1609-2011 |
|
Water absorption at partial immersion of samples during fixed long-time |
kg/m2 |
Not above |
3 |
State All-Union standard EN 12087 |
|
flammability |
degree |
- |
non-flammable |
State All-Union standard 30244-94 |
|
Density |
kg/m3 |
- |
110 (±10) |
State All-Union standard 17177-94 |
|
Parameter name |
Measurement unit |
Criteria |
Value |
|
length |
mm |
1200 (1000)* |
State All-Union standard EN 822 |
|
Width |
mm |
600 |
State All-Union standard EN 822 |
|
Thickness |
mm |
20-50* |
State All-Union standard EN 823 |
|
Grade by thickness |
Т |
Т4 |
State All-Union standard 32314-2015. |