ISOVER Vent Optimal
- category: ქვაბამბა | თბოიზოლაცია
- Brands: Saint-Gobain ISOVER
ISOVER Venti Optimal is a basalt-based mineral thermal insulation. The material is made ofnatural components of volcanic rocks of basalt group.  ... See more
ISOVER Venti Optimal is a basalt-based mineral thermal insulation. The material is made of
natural components of volcanic rocks of basalt group.
See less
Indicator Size Unit Value Method of
control
Thermal conductivity at temperature
(283±2)K (10±2) 0C, λ10, not more
W/(m-K)
0,035 ГОСТ 31925
Thermal conductivity at temperature
(283±2)K (10±2) 0С, λ25, not more
W/(m-K)
0,037 ГОСТ 31925
Estimated thermal conductivity in
operating conditions A, λA, not more
W/(m-K) 0,038 ГОСТ Р 54855
Calculated thermal conductivity in
operating conditions B, λB, not more
W/(m-K)
0,039 ГОСТ Р 54855
Compressive strength at 10% relative
deformation, not more than
kPa
10 ГОСТ EN 826
Tensile strength perpendicular to the
surface, not less than
kPa
3 ГОСТ ЕN 1607
Organic matter content, not more
than % by weight 4 ГОСТ 31430
Humidity, not more than % by weight 0,5 ГОСТ 17177
Sorption moisture absorption for 24
hours, not more than
% by weight
1 ГОСТ 17177
Vapor permeability mg/m-h-Pa 0,3 ГОСТ 25898-83
Water absorption at short-term and
partial immersion, not more than kg/m2 1 ГОСТ ЕN 1609
Flammability group - non-combustible
(NG)
ГОСТ 30244
Density kg/m3 65-85
- External layer of two-layer thermal insulation of ventilated facades with ventilation openings.
- Thermal insulation layer of ventilated facades with ventilation openings, in single-layer thermal
insulation.
As cladding of fire protection boxes in ventilated facades with ventilation openings:
1. Bearing or self-supporting wall (foundation)
2. Lower thermal insulation layer
3. Upper thermal insulation layer ISOVER Vent Optimal
4. Plate dowel
5. Clamp
6. Instructional materials
7. Outer decorative and protective layer (cladding)
- Can be used in all types of buildings without height restrictions.
- Increased bending strength due to the special orientation of the fibers.
- High level of thermal insulation due to low thermal conductivity.
- Non-combustible material (NG)
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
ISOVER Vent Optimal
choose a product
- Stone wool - Ravatherm 40 kg/m3 50x600x1200 mm (5.76 m2)
- Stone wool1200 * 600 * 50 mm (4.32 sq / m)
- Stone wool - Ravatherm 150 kg/m3 50x600x1200 mm (2.88 m2)
- Stone wool - Ravatherm 120 kg/m3 50x600x1200 mm (2.88 m2)
- Stone wool - Ravatherm 110 kg/m3 50x600x1200 mm (2.88 m2)
- TEXNOVENT EXTRA 1200 * 600 * 50 mm (4.32 sq / m)
- Stone wool - 1200*600*50 mm (8.64 m2)
- Stone wool ISOBOX 800*600*50 15 panels/pack (7.2 m2)
- Rock wool TERRAWOOL TW7050 with BLACK GLASS FIBER 50X600X1200 (70 kg/m3)
- TERRAWO with YELLOW GLASSFIBER 50X600X1200 (70 kg/m3) 5.7 6m2
- Rock wool TERRAWOOL 50mm 600x1200(130kg/m3) 2.88 m2
- Stone wool - Ravatherm 135 kg/m3 50x600x1200 mm (2.88 m2)
- Rolled stone wool with wire mesh Isotec Wired Mat 80 SM 2000x1000x50 mm. (2 sq.m.)
- Rolled stone wool with wire mesh and foil - Isotec Wired Mat 80-SM-AL-50/T-1000x2000
- ISOVER Sound Insulation
Indicator Size Unit Value Method of
control
Thermal conductivity at temperature
(283±2)K (10±2) 0C, λ10, not more
W/(m-K)
0,035 ГОСТ 31925
Thermal conductivity at temperature
(283±2)K (10±2) 0С, λ25, not more
W/(m-K)
0,037 ГОСТ 31925
Estimated thermal conductivity in
operating conditions A, λA, not more
W/(m-K) 0,038 ГОСТ Р 54855
Calculated thermal conductivity in
operating conditions B, λB, not more
W/(m-K)
0,039 ГОСТ Р 54855
Compressive strength at 10% relative
deformation, not more than
kPa
10 ГОСТ EN 826
Tensile strength perpendicular to the
surface, not less than
kPa
3 ГОСТ ЕN 1607
Organic matter content, not more
than % by weight 4 ГОСТ 31430
Humidity, not more than % by weight 0,5 ГОСТ 17177
Sorption moisture absorption for 24
hours, not more than
% by weight
1 ГОСТ 17177
Vapor permeability mg/m-h-Pa 0,3 ГОСТ 25898-83
Water absorption at short-term and
partial immersion, not more than kg/m2 1 ГОСТ ЕN 1609
Flammability group - non-combustible
(NG)
ГОСТ 30244
Density kg/m3 65-85