PENOPLEX OSNOVA - PENOPLEX 40*585*1185მმ (6,932 sq/m)
Thermal insulation “PENOPLEX OSNOVA” is highly effective thermal insulation material of the latest generation. The material is made from p... See more
Thermal insulation “PENOPLEX OSNOVA” is highly effective thermal insulation material of the latest generation. The material is made from polystyrene of general purpose by the use of extrusion method. The main advantages of PENOPLEX over other materials are its zero water absorption, high durability, environmental compatibility and low thermal conductivity.
See less
- Invariably low thermal conductivity;
- Zero water absorption (uniform structure of waterproof cells);
- High compressive and bending strength;
- Total bio-stability;
- Durability;
- Environmental compatibility.
- Regulations / Standards: TU 5767-006-54349294-2014 changed. 1-6 Control and assessment of production are carried out by accredited testing laboratories
- surface type: machine-cut
- colour: orange
- Data on Packaging: Slabs of PENOPLEX® are packed in UV-stabilized heat-shrink film.
Technical Characteristics:
|
Item |
Test methodology |
Unit of Measurement |
Slab indicator |
|
Compressive strength at 10 % of linear deformation, not less than, MPA (kgc/cm2; t/m2) 50 мм |
State All-Union standard EN 826-2011 |
MPa |
0,17 (1.7; 17) |
|
Water absorption for 24 hours, not more |
State All-Union standard 15588-86 |
% by volume |
0,4 |
|
Water absorption for 28 days |
% by volume |
0,5 |
|
|
Fire resistance category |
F3-123 |
group |
G4 |
|
estimated coefficient of thermal conductivity at operation "B" |
Code of Practice50.13330.2012 |
W/m·°K |
0,034 |
|
Partition wall sound insulation (plaster board -PENOPLEX® 50 mm – plaster board) |
State All-Union standard 27296-87 |
dB |
41 |
|
Structural noise insulation improvement index in floors |
State All-Union standard 16297-80 |
dB |
23 |
|
Vapor permeability coefficient |
mg/(m.hr.Pa) |
0,005 |
|
|
Density |
kg/m3 |
from 20 |
|
|
Elasticity coefficient |
MPa |
15 |
|
|
Thermal capacity per unit mass |
kJ/(kg.0С) |
1,45 |
|
|
Bending strength |
MPa |
0,20 |
|
|
Standard sizes |
Width |
mm |
585 |
|
Length |
mm |
1185 |
|
|
Thickness |
mm |
20; 30; 40; 50; 60; 80; 100; 120; 150 |
|
|
Operational temperature range |
ТУ |
°С |
-70 ... +75 |
Packaging
|
Slab thickness (mm) |
Slab width (mm) |
Slab length (mm) |
Quantity of slabs in package (pcs.) |
Volume (m³) |
|
20 |
585 |
1185 |
20 |
0,2780 |
|
30 |
585 |
1185 |
13 |
0,2704 |
|
40 |
585 |
1185 |
10 |
0,2770 |
|
50 |
585 |
1185 |
8 |
0,2776 |
|
60 |
585 |
1185 |
5 |
0,2080 |
|
80 |
585 |
1185 |
5 |
0,2772 |
|
100 |
585 |
1185 |
4 |
0,2773 |
|
120 |
585 |
1185 |
3 |
0,2496 |
“PENOPLEX OSNOVA” is designed for use in industrial and civil construction. “PENOPLEX OSNOVA®” is universal material to be used in anytype of structures (walls, roofs) with no specific load requirements for structural elements.
Products offered
პენოპლექსი Стена დაზოლილი 50*585*1185მმ (4,8526 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
პენოპლექსი Комфорт გლუვი 30*585*1185მმ (9,0119 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
პენოპლექსი Стена დაზოლილი 30*585*1185მმ (9,0119 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
პენოპლექსი Комфорт გლუვი 50*585*1185მმ (4,8526 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
PENOPLEX OSNOVA - PENOPLEX 30*585*1185მმ (9,012 sq/m)
- category: XPS insulation
- Brands: PENOPLEX
პენოპლექსი Комфорт გლუვი 40*585*1185მმ (6,2390 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
პენოპლექსი Комфорт გლუვი 20*585*1185მმ (13,8645 კვ/მ)
- category: XPS insulation
- Brands: PENOPLEX
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
PENOPLEX OSNOVA - PENOPLEX 40*585*1185მმ (6,932 sq/m)
choose a product
- xps 600*1200*40mm (7,20 m2)
- პენოპლექსი Стена დაზოლილი 50*585*1185მმ (4,8526 კვ/მ)
- xps 600*1200*30mm (10,08m2)
- XPS Carbon Eco 1180*580*30 (8.8972 კვ/მ)
- PENOPLEX OSNOVA 50*585*1185 mm (5,546 sq/m)
- პენოპლექსი Комфорт გლუვი 30*585*1185მმ (9,0119 კვ/მ)
- XPS Carbon Eco 1180*580*50 (5.4752 კვ/მ)
- პენოპლექსი Стена დაზოლილი 30*585*1185მმ (9,0119 კვ/მ)
- პენოპლექსი Комфорт გლუვი 50*585*1185მმ (4,8526 კვ/მ)
- PENOPLEX OSNOVA - PENOPLEX 30*585*1185მმ (9,012 sq/m)
- პენოპლექსის ფილა : xps 600*1200*50 mm (5.76m2)
- პენოპლექსი Комфорт გლუვი 40*585*1185მმ (6,2390 კვ/მ)
- პენოპლექსი Комфорт გლუვი 20*585*1185მმ (13,8645 კვ/მ)
- Invariably low thermal conductivity;
- Zero water absorption (uniform structure of waterproof cells);
- High compressive and bending strength;
- Total bio-stability;
- Durability;
- Environmental compatibility.
- Regulations / Standards: TU 5767-006-54349294-2014 changed. 1-6 Control and assessment of production are carried out by accredited testing laboratories
- surface type: machine-cut
- colour: orange
- Data on Packaging: Slabs of PENOPLEX® are packed in UV-stabilized heat-shrink film.
Technical Characteristics:
|
Item |
Test methodology |
Unit of Measurement |
Slab indicator |
|
Compressive strength at 10 % of linear deformation, not less than, MPA (kgc/cm2; t/m2) 50 мм |
State All-Union standard EN 826-2011 |
MPa |
0,17 (1.7; 17) |
|
Water absorption for 24 hours, not more |
State All-Union standard 15588-86 |
% by volume |
0,4 |
|
Water absorption for 28 days |
% by volume |
0,5 |
|
|
Fire resistance category |
F3-123 |
group |
G4 |
|
estimated coefficient of thermal conductivity at operation "B" |
Code of Practice50.13330.2012 |
W/m·°K |
0,034 |
|
Partition wall sound insulation (plaster board -PENOPLEX® 50 mm – plaster board) |
State All-Union standard 27296-87 |
dB |
41 |
|
Structural noise insulation improvement index in floors |
State All-Union standard 16297-80 |
dB |
23 |
|
Vapor permeability coefficient |
mg/(m.hr.Pa) |
0,005 |
|
|
Density |
kg/m3 |
from 20 |
|
|
Elasticity coefficient |
MPa |
15 |
|
|
Thermal capacity per unit mass |
kJ/(kg.0С) |
1,45 |
|
|
Bending strength |
MPa |
0,20 |
|
|
Standard sizes |
Width |
mm |
585 |
|
Length |
mm |
1185 |
|
|
Thickness |
mm |
20; 30; 40; 50; 60; 80; 100; 120; 150 |
|
|
Operational temperature range |
ТУ |
°С |
-70 ... +75 |
Packaging
|
Slab thickness (mm) |
Slab width (mm) |
Slab length (mm) |
Quantity of slabs in package (pcs.) |
Volume (m³) |
|
20 |
585 |
1185 |
20 |
0,2780 |
|
30 |
585 |
1185 |
13 |
0,2704 |
|
40 |
585 |
1185 |
10 |
0,2770 |
|
50 |
585 |
1185 |
8 |
0,2776 |
|
60 |
585 |
1185 |
5 |
0,2080 |
|
80 |
585 |
1185 |
5 |
0,2772 |
|
100 |
585 |
1185 |
4 |
0,2773 |
|
120 |
585 |
1185 |
3 |
0,2496 |