Airblock Mortar (CMC) 25 kg
- category: Gas concrete block
Airblock Mortar (CMC) 25 kg
Airblock Mortar (CMC) 25 kg
See less
The surface to be coated must be dry, clean, solid and load-bearing. It is used
to glue blocks to be applied to the surface of the gas block, if necessary, add it
before gluing. The thickness of the applied glue at the point of joining the
blocks should not be more than 1-2 mm. This thickness of the glue
guarantees that the thermal insulation properties of the gas block will be
maintained to the maximum.
Products offered
Gas concrete block D500 (600*250*150)
- category: Gas concrete block
- Brands: Gobustone
Aerated concrete block D500 60*30*15 sm
- category: Gas concrete block
- Brands: Smart Block
Gas concrete block D400 (600*250*300)
- category: Gas concrete block
- Brands: Gobustone
Aerated concrete block D500 60*30*10 sm
- category: Gas concrete block
- Brands: Smart Block
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Airblock Mortar (CMC) 25 kg
choose a product
- Aerated concrete block D500 (600*250*250)
- Aerated concrete block D500 60*30*20 sm
- Aerated concrete block D500 (600*250*200mm)
- Aerated concrete block D500 (600*250*100)
- Aerated concrete block D500 60*30*25 sm
- Gas concrete block D500 (600*250*150)
- Air block (gas block) dowel 8X55
- Aerated concrete block D500 60*30*15 sm
- Gas concrete block D400 (600*250*300)
- Air block (gas block) dowel 10X60
- Dowel for gas block 14X80
- Aerated concrete block D500 60*30*10 sm
The surface to be coated must be dry, clean, solid and load-bearing. It is used
to glue blocks to be applied to the surface of the gas block, if necessary, add it
before gluing. The thickness of the applied glue at the point of joining the
blocks should not be more than 1-2 mm. This thickness of the glue
guarantees that the thermal insulation properties of the gas block will be
maintained to the maximum.