5 HSS-G DRILL BITS 4.5X82
- category: სახვრეტ-სანგრევი ინსტრუმენტები / ბურღი და ბურღის კომპლექტი
- Brands: BOSCH
HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steelCobalt alloy and fully ground HSS provide wear resistance an... See more
HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel
Cobalt alloy and fully ground HSS provide wear resistance and heat protection
Two cutters and two flutes remove chips quickly to make the bits last even longer
Cylindrical shank compatible with three-jaw drill chucks
See less
"• Working diameter, mm - 4.5
• Total length, mm - 80
Working length, mm - 47"
HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel
Two cutters and two flutes remove chips quickly to make the bits last even longer
Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8
Active cutting and perfect centring without wandering are achieved by the pointed split-point tip
The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.
This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.
Products offered
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
5 HSS-G DRILL BITS 4.5X82
choose a product
- 5 HSS-G DRILL BITS 4.8X87
- TOL987-75697 Drill bits 10MM
- Jig Saw GST8000E
- ბეტონის ბურღი პერფერატორის 8*210მმ, SD4-08210
- 10 Impact drill bit MultiConstruction CYL-9; 8 x 80 x 120
- 10 SDS-Plus 5X hammer bits 12x200x260mm
- 10 HSS-G DRILL BITS 6ММ
- CONICAL GRINDINGSTONE MED/HARD 20Х25 6ММ
- TOL1409-74912 SDS-PLUS Hammer drill X-TIP 16*450MM
- 1 HSS PointTeQ drill bit 12 mm
- 10 HSS-CO DRILL BITS 6.5ММ
- TOLSEN TOL369-75350 ბურღი 14*210MM
- Drill Bit 3.0mm (DBT1110301)
- Twist Drill PointTeQ 1.0mm
- TOLSEN TOL367-75346 Drill 10*210MM
"• Working diameter, mm - 4.5
• Total length, mm - 80
Working length, mm - 47"