ФАНЕРА ФК – IV/IV 1525*1525 mm (T)
- category: ფანერა | წიწვოვანი ფანერა
- Brands: TECHNOFLEX
FK – the material with quite low wet resistance. In this particular case, the function of binder is performed by carbamide glue not emitting har... See more
FK – the material with quite low wet resistance. In this particular case, the function of binder is performed by carbamide glue not emitting harmful chemicals. This allows to usethis type of plywood for interior finishing. Moderated level of moisture content is allowed.
FK – veneer layers are glued with carbamide glue. The material is less wet-resistant than FSF plywood. As a rule, it is easier to provide environmental safety while manufacturing. FK is used for manufacturing furniture, packaging, interior finishing, structures in dry conditions.
See less
The standard sizes: 1525х1525 mm; the thickness varies from 2,4 to 40 mm.
- The plywood never cracks through. This is explained by particular production technology which ensures safe and reliable gluing of veneer panels all over the plywood surface. Even in the event of damage and faults with one of the layers, there never happens any through crack.
- Good elasticity. The panels of the plywood can be bent practically into any shape. It is enough to slightly notch the panel without causing any damage to one of the outer layers, and bend the panel. A large number of such notches all over the surface of the plywood, however, slightly decreases its durability. There is no doubt though about reliability of the gained construction.
- The material is extremely easy to transport. FK plywood can be transported over considerable distances without fearing causing any damage.
- A wide range of plywood sizes available. So long as the plywood has quite oversized dimensions - mostly 1220х2440 mm, 1250х2500 mm, 1525х1525 mm – construction works are significantly easier, for example, for interior wall boarding or floor boarding to be further coated with laminate. Such dimensions of the plywood allow to manufacture fair-sized furniture components without increase.
- Smooth and even surface of the both sides of plywood panel are equally durable. This advantage allows to use FK plywood not just for construction and renovation works but for furniture manufacture.
Products offered
SVEZA Regular Exterior II/III - 2440*1220 მმ
- category: Plywood | softwood plywood
- Brands: SVEZA
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
ФАНЕРА ФК – IV/IV 1525*1525 mm (T)
choose a product
- SVEZA Regular Exterior II/III - 2440*1220 მმ
The standard sizes: 1525х1525 mm; the thickness varies from 2,4 to 40 mm.
- The plywood never cracks through. This is explained by particular production technology which ensures safe and reliable gluing of veneer panels all over the plywood surface. Even in the event of damage and faults with one of the layers, there never happens any through crack.
- Good elasticity. The panels of the plywood can be bent practically into any shape. It is enough to slightly notch the panel without causing any damage to one of the outer layers, and bend the panel. A large number of such notches all over the surface of the plywood, however, slightly decreases its durability. There is no doubt though about reliability of the gained construction.
- The material is extremely easy to transport. FK plywood can be transported over considerable distances without fearing causing any damage.
- A wide range of plywood sizes available. So long as the plywood has quite oversized dimensions - mostly 1220х2440 mm, 1250х2500 mm, 1525х1525 mm – construction works are significantly easier, for example, for interior wall boarding or floor boarding to be further coated with laminate. Such dimensions of the plywood allow to manufacture fair-sized furniture components without increase.
- Smooth and even surface of the both sides of plywood panel are equally durable. This advantage allows to use FK plywood not just for construction and renovation works but for furniture manufacture.