Calmatron E - 6 kg
- category: Additive to concrete
KALMATRON-E - penetrating action waterproofing material. KALMATRON-E damp-fungus-waterproof environmentally friendly building material for your healt... See more
KALMATRON-E - penetrating action waterproofing material.
KALMATRON-E damp-fungus-waterproof environmentally friendly building material for your health guard.
See less
Used as a waterproofing material for water, moisture And antifungals both as a coating and as a filler.
- • When used as a spray, the consistency of the solution should be like a thin layer, ie 160-180 milligrams of water is added to 1 kg of powder. The vortexing process is carried out with a mixer until a homogeneous mass is obtained (1-2 minutes on low speed). It is a necessary condition - the surface must be watered (applied) before applying;
- The filling process is carried out with any handy tool (even by hand).
- In this case 100-120 mg of water is added to 1 kg of material and the vortexing process is carried out using a mixer until a homogeneous mass is obtained. (1-2 minutes on low speed). • If the water flow is filtered under high pressure, please contact us or write to us As a rule, the problem of water filtration (inflow) is different, therefore the cost of the material will be different each time.1. Before applying to the work surface, the pores should be opened with a metal brush, perforator, Or using another handy tool.
2. The surface should be washed after opening the pores.
3. After rinsing the surface should be primed with KALMATRON-E solution (1: 4 kalmatron-water In proportion).
4. KALMATRON-E must be processed on the ground surface no later than 10 minutes after grounding With solution.
5. KALMATRON-E treated surface especially during the first 6-10 hours It should be watered (watered) several times, and the watering process should be continued Within 72 hours.
Products offered
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- category: Additive to concrete
FOX ALPHACOAT FF900 (5 LITER)
- category: Additive to concrete
- Brands: FOX BAU
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Calmatron E - 6 kg
choose a product
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- FOX SEALPLUS FM502 (20KG)
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- FOX SEALPLUS FM501 (20KG)
- Concrete admixture ARSET KRISTALIZE – 1100 kg
- Concrete admixture ARSET KUR AC – 30 kg
- FOX POLIFIBER M12 (600 gram)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- Concrete admixture VINMIX – 5 L
- Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- FOX ALPHACOAT FF900 (5 LITER)
- ARSET KUR AC - 200 kg