Mapetard /25 კგ
- category: Additive to concrete
- Brands: MAPEI
TECHNICAL CHARACTERISTICS Mapetard is a water solution of active polymers that retard cement hydration and limit slump loss in concrete during hot wea... See more
TECHNICAL CHARACTERISTICS Mapetard is a water solution of
active polymers that retard cement hydration and limit slump loss in concrete during hot weather and when transporting over long distances. Retention of workability and delay in setting increase the dosage of the admixture, which can vary from 0.2% to 0.5% by weight of cement.
See less
WHERE TO USE Mapetard is especially recommended for
applications which require a good workability retention and a retarded rate of cement hydration at early ages. Mapetard is mainly used for: · ready-mixed concrete (especially in hot weather); · pumped concrete; · mass concrete; · retarded cementitous mortars. Some application examples Mapetard is especially recommended for: · ready-mixed quality concrete; · mass concrete pours where it is necessary to reduce thermal peaks generated by the development of heat by hydration: dams, foundations, etc; · ready-mixed mortars that can be used 24 to 48 hours after mixing.
Products offered
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
FOX ALPHACOAT FF900 (5 LITER)
- category: Additive to concrete
- Brands: FOX BAU
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Mapetard /25 კგ
choose a product
- FOX POLIFIBER M12 (600 gram)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- Concrete admixture ARSET KRISTALIZE – 1100 kg
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- FOX SEALPLUS FM502 (20KG)
- FOX SEALPLUS FM501 (20KG)
- Concrete admixture ARSET KUR AC – 30 kg
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- ARSTEP EXTRA 355 S Cons - 30 kg
- ARSET FRIZ 100 - 1100კგ
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- FOX ALPHACOAT FF900 (5 LITER)
- FOX SEALPLUS FM501