FOX ALPHACOAT FF900 (5 LITER)
- category: Additive to concrete
- Brands: FOX BAU
Special protective and reinforcing material for concrete and natural stone surfaces
Special protective and reinforcing material for concrete and natural stone surfaces
See less
The material base - liquid acrylic resin
Density - 0.92 kg/l
Color - transparent
Final appearance - transparent, clear
Brightness point +25°C
Drying time - 2 hours
The temperature of the used surface is +10°C /+30°C
- Easy to apply and use.
- Creates a transparent, crystalline surface.
- Resistant to oils and fuel residues.
- Protection against all kinds of weather influences and the formation of fungi on surfaces.
- Prevents dusting and provides a harder surface.
- Extremely easy to clean with a smooth surface.
- Provides abrasion resistance.
- Penetrates deep and gives a lively look.
- Resistant to frost and UV.
- Can be applied by brush, roller and spray.
- After application of the surface hardener, sudden loss of water in the concrete is prevented by using the curing site and obtaining a permanent surface of the top layer.
- Permeable to water vapor when applied to exterior surfaces.
- Water repellent.
- All types of old or new concrete, rough outdoor concrete,
- In ground concretes applied with a surface hardener,
- outdoor concretes painted with acid stains,
- On surfaces such as natural stone, travertine, marble, cotto, press brick, etc.
- In cement prefabricated facade coverings,
- On all types of concrete surfaces,
- On Wash concrete surfaces,
- Used in urban infrastructure.
Products offered
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
FOX ALPHACOAT FF900 (5 LITER)
choose a product
- FOX SEALPLUS FM501 (20KG)
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- FOX POLIFIBER M12 (600 gram)
- FOX SEALPLUS FM502 (20KG)
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- Concrete admixture ARSET KUR AC – 30 kg
- Concrete admixture ARSET KRISTALIZE – 1100 kg
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- ARSET KUR AC - 200 kg
- ARSET KRISTALIZE - 30 kg
- ARSET FRIZ 100 - 1100კგ
The material base - liquid acrylic resin
Density - 0.92 kg/l
Color - transparent
Final appearance - transparent, clear
Brightness point +25°C
Drying time - 2 hours
The temperature of the used surface is +10°C /+30°C