FOX SEALPLUS FM502 (20KG)
- category: Additive to concrete
- Brands: FOX BAU
A liquid crystal capillary additive that reduces the water permeability of concrete
A liquid crystal capillary additive that reduces the water permeability of concrete
See less
FOX SEALPLUS FM502 is a liquid crystalline capillary impermeability-promoting blend solution consisting of a variety of specialty chemicals. Thanks to these active chemicals, it reacts with the by-products formed by the hydration of water and cement in freshly poured concrete, and forms an insoluble crystalline structure in the pores and capillary spaces of the concrete. Thanks to this crystal structure, the water permeability of concrete decreases. FOX SEALPLUS FM502 has a self-healing feature for potential cracks smaller than 0.4mm
Density - 1.12 kg/l
Solids ratio - 10%
Color - transparent
pH - 10.5±0.1
Chlorine content EN 480-10 <0.1%
Alkali content EN 480-12 <3%
Capillary water absorption EN 480-5 / 7 days - 28 days / after 7 days of solution hardening/control ≤ concrete hardening 50% (by weight)
After 90 days of hardening/control mixing ≤ concrete hardening 60% (by weight)
Compressive strength EN 12390-3/ 28 days / control mix ≥ concrete hardening 85%
Air content EN 12350-7/ ≤2%
Working temperature +5°C / +35°C
- Added to concrete during mixing
- Reduces permeability of concrete.
- non-toxic.
- Penetrates into the concrete internal structure.
- Reduces the passage of water and other liquids.
- Can repair up-to-0.4 mm capillary cracks
- Withstands positive and negative hydrostatic pressure.
- Provides protection from sewage and industrial waste.
- foundations and basements,
- waste water treatment facilities,
- Dams, canals, tunnels and harbors,
- Water supplies
- concrete pipes,
- multi-storey parking lots,
- swimming pools,
- Retaining walls and breakwaters
Products offered
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
delivery
- When purchasing products for up to 80 GEL, the delivery price is 10 GEL;
- When purchasing products in the amount of 80 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.80 GEL;
- When purchasing products worth more than GEL 500, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
FOX SEALPLUS FM502 (20KG)
choose a product
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- ARSTEP EXTRA 355 S Cons - 30 kg
- FOX ALPHACOAT FF900 MATTE (5 LITER)
- Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- FOX POLIFIBER M12 (600 gram)
- Concrete admixture ARSET KUR AC – 30 kg
- Concrete admixture VINMIX – 5 L
- Concrete admixture ARSET KRISTALIZE – 1100 kg
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- FOX ALPHACOAT FF900 (5 LITER)
- FOX SEALPLUS FM501
FOX SEALPLUS FM502 is a liquid crystalline capillary impermeability-promoting blend solution consisting of a variety of specialty chemicals. Thanks to these active chemicals, it reacts with the by-products formed by the hydration of water and cement in freshly poured concrete, and forms an insoluble crystalline structure in the pores and capillary spaces of the concrete. Thanks to this crystal structure, the water permeability of concrete decreases. FOX SEALPLUS FM502 has a self-healing feature for potential cracks smaller than 0.4mm
Density - 1.12 kg/l
Solids ratio - 10%
Color - transparent
pH - 10.5±0.1
Chlorine content EN 480-10 <0.1%
Alkali content EN 480-12 <3%
Capillary water absorption EN 480-5 / 7 days - 28 days / after 7 days of solution hardening/control ≤ concrete hardening 50% (by weight)
After 90 days of hardening/control mixing ≤ concrete hardening 60% (by weight)
Compressive strength EN 12390-3/ 28 days / control mix ≥ concrete hardening 85%
Air content EN 12350-7/ ≤2%
Working temperature +5°C / +35°C
