ARSET KUR AC - 30 kg

• Ready to use, easy to carry
• Prevents shrinkage by reducing the rate of water loss from freshly poured concrete.
• Free of chlorides and organic solvents.
• Reduces the formation of cracks.
• Reduces surface dust.
• Differs from paraffin-based hardening reagents.
• Does not interfere with the setting of cement and gypsum plaster on it.

Use

• Freshly poured concrete and tensile surfaces.
• When using surface hardening reagents
• Concrete mixing to prevent water evaporation after removal of the formwork
• Concrete and airport floors
• Irrigation canals
• Concrete in outdoor areas

Dosage

Depending on the surface condition, the average is 0.150-0,200 kg / m2.

Deposition method

ARSET KÜR The application of AC to the surface is carried out directly with a brush, roller or spray when the surface becomes brittle after pouring and leveling new concrete.

Applying should be carried out approximately 30-45 minutes after the end of the surface hardening process according to the ambient temperature.

Placing should be done after removing the molds. Prior to application, the work surface must be cleaned of dust, dirt and other elements that prevent it from clogging.

After application, the product gives the surface a transparent, matte appearance.

Shelf life and shelf life

Must be stored at + 5 ° C to + 35 ° C. Under proper storage conditions, the shelf life of the product is 12 months from the date of manufacture if the product is stored in its original packaging, unopened and undamaged. Stir before use.

Security measures

When using the product, use protective clothing, gloves, goggles and a mask that are compatible with health and safety regulations. Avoid direct contact with eyes and skin during storage and use, in case of contact, rinse thoroughly with soap and water, seek medical advice immediately. Keep away from all types of food and children. For detailed safety information, see the Material Safety Data Sheet.

Responsibility: The information provided in this Technical Data Sheet is based on our manufacturing practices and the latest technological innovations. Company Arsan Kimya Makine San. Ve Dış Tic. Ltd. .Ti. Responsible only for product quality. Arsan Kimya Makine San. Ve Dış Tic. Ltd. .Ti. Is not responsible for the results obtained due to improper use of the product and / or without considering written recommendations regarding the field of use and method of use. The present technical data means that the previous editions automatically become invalid.