ARSTEP EXTRA 355 S Cons - 30 kg
- category: ბეტონის დანამატი
ARSTEP EXTRA 355 S CONS is a highly concentrated, water-reducing, bond-curing superplasticizer that reduces the water / cement ratio and increases the... See more
ARSTEP EXTRA 355 S CONS is a highly concentrated, water-reducing, bond-curing superplasticizer that reduces the water / cement ratio and increases the working capacity and mechanical properties of concrete.
ARSTEP EXTRA 355 S CONS
Highly concentrated / Demand Reduction / Bonding / Superplasticizing additive for concrete
See less
- Chemical base: Polymer base Color,
- Appearance: Brown liquid
- pH: 5-9
- Density: 1.21 ± 0.03 g / cm3
- Chloride content (%): <0.1 (TS EN 480-10)
- Alkaline content (%): <5 (TS EN 480-12)
- Complies with standards: ASTM C 494 Type F
- 30 kg drum
- 250 kg drum
- 3660 kg container
- Increases the early and final strength of concrete.
- Improves the workability of concrete.
- Reduces the risk of concrete splitting.
- Provides a glossy concrete surface in the formwork, without splitting.
- ARSTEP EXTRA 355 S CONS does not contain chlorides.
- Production of ready-mixed concrete
- Production of different types of concrete such as reinforced, non-reinforced, light or heavy concrete
- Mass concrete production
ARSTEP EXTRA 355 S CONS is used in the amount of 0.7-1.3% of the total weight of the binder.
Method of consumption
Mix aggregates and binders (cement - quartz dust - flying ash - blown slag) until a homogeneous mixture is obtained. After adding 70% mixing water to the dry mixture, add the remaining ARSTEP EXTRA 355 S CONS to the water and mix well.
Compatibility with other add-ons
ARSTEP EXTRA 355 S CONS can be used with the following additives. Laboratory tests should be performed before use.
- Arset Air - air restraint supplement
- Arset Friz - Accelerator for quality pouring of concrete in cold weather
- Arset Proof - additive to increase the water resistance of concrete
- Arset Doz - additive that regulates the density of concrete
Shelf life
Must be stored at + 5 ° C to + 35 ° C. Under proper storage conditions, the shelf life of the product is 12 months from the date of manufacture if the product is stored in its original packaging, unopened and undamaged. Stir before use.
Warning
The design of the concrete mix and the dosage of additives should be determined by laboratory tests according to the grade and properties of the concrete.
Security measures
When using the product, use protective clothing, gloves, goggles and a mask that are compatible with health and safety regulations. Avoid direct contact with eyes and skin during storage and use, in case of contact, rinse thoroughly with soap and water. In case of contact with eyes, consult a doctor immediately. Avoid all types of food. Keep away from children. See Material Safety Data Sheet for detailed safety information.
Responsibility: The information provided in this Technical Data Sheet is based on our manufacturing practices and the latest technological innovations. Company YAPICHEM KİMYA SAN. A.S. Responsible only for product quality. YAPICHEM KİMYA SAN. A.S. Is not responsible for the results obtained due to improper use of the product and / or without considering written recommendations regarding the field of use and method of use. The present technical data means that the previous editions automatically become invalid.
Products offered
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
ARSTEP EXTRA 355 S Cons - 30 kg
choose a product
- FOX SEALPLUS FM502 (20KG)
- Mapeplast N10 / 25 კგ
- FOX SEALPLUS FM501
- FOX HARTOP FF300 NATURAL GREY (25KG)
- FOX SEALPLUS FM501 (20KG)
- ARSET KRISTALIZE - 1100 kg
- Dynamon SX32/ 25 კგ
- Mapeform DMA 2000 / 8,6 კგ
- FOX ALPHACOAT FF900 (5 LITER)
- MAPEFAST CF 12 - 35 kg
- Mapeair AE 2 / 5 კგ
- FOX POLIFIBER M12 (600 gram)
- ARSET KRISTALIZE - 200 kg
- Mapecure E / 25 კგ
- Mapeform DMA 1000 / 4,5 კგ
- Chemical base: Polymer base Color,
- Appearance: Brown liquid
- pH: 5-9
- Density: 1.21 ± 0.03 g / cm3
- Chloride content (%): <0.1 (TS EN 480-10)
- Alkaline content (%): <5 (TS EN 480-12)
- Complies with standards: ASTM C 494 Type F
- 30 kg drum
- 250 kg drum
- 3660 kg container