- Consumption (filling of plasterboard plate joints) - 0.25kg/m2
- Layer thickness: minimum-1mm, maximum-5 mm.
- Strength: adhesion-not less than 2.0 (MPa) flexuosity-not less than 1.0 (MPa)
- Maximum fraction: not more than 0.2 mm
- Packing: 25kg.
- Shelf life in undamaged packaging: 6 months
- Knauf Fuga puttying material is specially designed for filling of joints of Knauf plasterboard plates
- No cracks of mixture after drying
- The material is made of eco-friendly natural mineral (gypsum) and does not contain any substances harmful to human health
The universal putty material Knauf Fugen is designed for the following applications:
- Processing of seams (joints) of Knauf plasterboard plates using reinforcing tape;
- Treatment of possible cracks and other damages of Knauf plasterboard plates
- Thin-layer puttying of concrete and plastered surfaces
- Thin-layer puttying of plasterboard
- Filling of joints of precast concrete elements
- Gluing of plasterboard plates on even surfaces
- Gluing and puttying of plasterboard plates
- Internal works
Products offered
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Gypsum Putty Knauf FugaGips 25kg.
choose a product
choose a product
- Putty for wood XYLO-FINE No10 NATURAL 250gr
- Gypsum putty Knauf SatenGips 25kg.
- Gypsum-based plaster Izogips JET (30kg
- XYLO-FINE No15 OAK DARK 250gr
- XYLO-FINE No3 WALNUT LIGHT 250gr
- სამანქანე ბათქაში 30 კგ."NoR"/Makina Suvadt 30 kg
- ბათქაში სამშენებლო "ABS" Saten Alci 25კგ
- Tile adhesive: WEBER.KOL SRC MAX GRI 25 KG (frost-resistant, for small tiles)
- მანქანური თაბაშირი ნური ეკონომი ( 30 კგ)
- XYLO-FINE No9 OAK LIGHT 250gr
- თაბაშირი 25 კგ ABS
- თაბაშირი პირველი პირი 25 კგ "Corella"/ Astar Suvadr 25 kg
- Gypsum installation glue Knauf Perlfix 25 kg
- Grout gray weber.joint sil gri 2 kg
- XYLO-FINE No16 TEAK 200gr
- Consumption (filling of plasterboard plate joints) - 0.25kg/m2
- Layer thickness: minimum-1mm, maximum-5 mm.
- Strength: adhesion-not less than 2.0 (MPa) flexuosity-not less than 1.0 (MPa)
- Maximum fraction: not more than 0.2 mm
- Packing: 25kg.
- Shelf life in undamaged packaging: 6 months